Dishwasher repair in Katy often comes down to water that will not leave or water that never gets hot. Standing water in the tub means a clogged filter, a blocked drain hose or a failed drain pump. The drain hose usually ties into the garbage disposal, and a disposal fitted without its knockout plug removed blocks the dishwasher from day one.
Cloudy glasses and gritty plates are the other big complaint. Katy's water comes from wells in the Gulf Coast Aquifer, and minerals in well water leave white scale on spray arms, the heating element and the inlet valve screen. Blocked spray arm holes cut the wash pressure. A failed heating element leaves dishes wet and the water too cool to dissolve detergent.
Most dishwasher repairs cost $100 to $300, and dishwashers last about 9 years. A door gasket, inlet valve or drain pump is a sound repair on a machine under 7 years old. A wash motor at $350 to $500 or a control board at $200 to $600 gets close to the price of a new mid-range dishwasher, so read the estimate with that in mind.
Dishwasher Repair Services
✓Dishwasher Not Draining
Clears the filter and drain hose and tests the drain pump when water stays in the tub.
✓Dishwasher Leak Repair
Replaces a worn door gasket, a cracked hose or a leaking pump seal and checks the float switch.
✓Dishes Not Coming Clean
Clears scaled spray arms and tests the wash motor, inlet valve and detergent dispenser.
✓Heating Element Replacement
Fits a new element when dishes stay wet and the water never gets hot.
✓Control Panel and Door Latch Repair
Fixes a machine that will not start because the latch, touchpad or control board has failed.
Dishwasher Repair Cost in Katy, TX
| Service | Typical Range | What Affects It |
|---|---|---|
| Water inlet valve | $80 to $170 | Scale on the screen is a common cause |
| Door gasket seal | $80 to $200 | Depends on the tub design |
| Drain pump | $100 to $400 | Less when the pump is only blocked |
| Heating element | $200 to $350 | Some models hide the heater in the pump |
| Wash motor | $350 to $500 | Compare with a new dishwasher first |
| Control board | $200 to $600 | Part price varies widely by brand |
Ranges are typical for Katy, TX. The technician gives a written estimate before any work starts.
How it works
- 1
Call with the symptom
Say what the dishwasher does at the fault: no start, no fill, no drain, a leak or poor cleaning.
- 2
Testing at the dishwasher
The technician checks the filter, spray arms, pumps, valve, element and door latch.
- 3
Written estimate
The part, labor and total are written down before any repair begins.
- 4
Repair and wash test
The dishwasher runs a fill, wash and drain to prove the fix and check for leaks.
Pricing
$100 to $300 common